Pages: [1]
« previous next »
  Print  
Author Topic: New boats for 2010  (Read 1441 times)
0 Members and 1 Guest are viewing this topic.
Fredde Cederberg
Global Moderator
Jr. Member
*****
Posts: 61
« on: October 21, 2009, 06:48:10 PM »
Whos is building new boats and what hulls?

I am making a new 15cc FSR-V hull, bottom is almost done, will make the mould next week, I hope Smiley and then start on thetop and cover.

The plan is also to build a new Raptor with some different set up.
Logged
C Fridh
Team Sweden
Newbie
*
Posts: 25
« Reply #1 on: October 22, 2009, 09:03:59 AM »
Quote from: Fredde Cederberg on October 21, 2009, 06:48:10 PM
The plan is also to build a new Raptor with some different set up.

Typical... I just built the old one... Wink

/Christian
Logged
FSR-V3,5 Raptor - CMB - Futaba
Fredde Cederberg
Global Moderator
Jr. Member
*****
Posts: 61
« Reply #2 on: October 22, 2009, 06:56:11 PM »
No no it's not a new design Raptor, still the same hull just a new set up of the drive line. Grin
Logged
C Fridh
Team Sweden
Newbie
*
Posts: 25
« Reply #3 on: October 22, 2009, 10:00:33 PM »
Quote from: Fredde Cederberg on October 22, 2009, 06:56:11 PM
No no it's not a new design Raptor, still the same hull just a new set up of the drive line. Grin

Ok! So I just have to rip it apart then! Cheesy ha ha ha
Naaaa.... It runs great! Really! It's a great little boat You have designed! Smiley

/C
Logged
FSR-V3,5 Raptor - CMB - Futaba
Fredde Cederberg
Global Moderator
Jr. Member
*****
Posts: 61
« Reply #4 on: October 23, 2009, 07:34:39 AM »
Well it ain't sure the new set up is better but if I never try I won't find out  Tongue
Logged
C Fridh
Team Sweden
Newbie
*
Posts: 25
« Reply #5 on: October 23, 2009, 01:37:07 PM »
Ha ha ha  Grin I'll wait and see then! Wink
Logged
FSR-V3,5 Raptor - CMB - Futaba
Fredde Cederberg
Global Moderator
Jr. Member
*****
Posts: 61
« Reply #6 on: November 22, 2009, 06:45:59 PM »
Only 1 month later the 15cc hull mould is done, fine grinding and polishing is going on and hopefully I can start to wax it in the end of the week and mould the first one next week, will do a picture when the first hull is moulded.
Logged
Fredde Cederberg
Global Moderator
Jr. Member
*****
Posts: 61
« Reply #7 on: November 27, 2009, 12:03:25 PM »
I had the possibility to work undisturbed this week so yesterday I moulded the first hull, will do a picture of it in the weekend. Smiley
Logged
gun man
Newbie
*
Posts: 1
« Reply #8 on: January 19, 2010, 05:32:50 PM »
Hey Frede you promose somme photos ??/
Logged
Fredde Cederberg
Global Moderator
Jr. Member
*****
Posts: 61
« Reply #9 on: January 20, 2010, 12:54:13 PM »
Yes I have done some photos,I'll try to upload them tonight, the top is almost done also, I am waxing the plug at the moment and the mould will be done next week. So only the cover to do.
Logged
Fredde Cederberg
Global Moderator
Jr. Member
*****
Posts: 61
« Reply #10 on: February 10, 2010, 08:42:21 PM »




The name of this hull is Boudicca, it will suit 15cc to 26cc engines.
Logged
C Fridh
Team Sweden
Newbie
*
Posts: 25
« Reply #11 on: February 11, 2010, 08:00:51 AM »
Nice! Smiley It will be great to see it with the hatch!

/Christian
Logged
FSR-V3,5 Raptor - CMB - Futaba
Barni50
Newbie
*
Posts: 1
« Reply #12 on: February 12, 2010, 09:27:43 PM »
Hi Folks,
for 2010 the new DELTA 26/15 is ready,
by Jörg
 www.cmbdeutschland.de
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to: